Paket yang Dibutuhkan :

untuk lusca r14809 : http://untuk-kita-semua.googlecode.com/files/SQUID%202%20LUSCA.zip

Untuk lusca FMI : http://untuk-kita-semua.googlecode.com/files/SQUID-CONF.zip

Link Dw UBUNTU 10.10 64 bit http://ubuntu.pesat.net.id/releases/…rver-amd64.iso

Bahan-bahan :
- Ubuntu 10.10 64 bit
- Ip proxy 192.168.2.2
- Gatewai 192.168.2.1
- Ip mikrotik ke arah proxy 192.168.2.1/24
- Ram 2 GB
- HDD Sata 320 GB

1. Partisi HDD

Dari harddisk 320 Gb dibagi dg type partisi primary sebagai berikut:
256 Mb ext4 /boot ( Flag Boot) jika Flag Boot masih off setelah pilihan on ABAIKAN SAJA
16 Gb ext4 /
2.0 Gb swap swap sesuaikan dengan RAM fisik cpu anda
sisanya gb btrfs /cache

2. Install Paket

OPTIMALKAN partisi btrfs nya :

# lsmod |grep -i btrfs

# nano /etc/fstab

/cache btrfs noatime,compress,noacl 0 2

OPTIMALKAN juga kernelnya :

default FD 1024
cek di console

# ulimit -n

cara merubah :
# ulimit -HSn 65536

# echo “root soft nofile 65536″ >> /etc/security/limits.conf
# echo “root hard nofile 65536″ >> /etc/security/limits.conf

# nano /etc/pam.d/common-session

session required pam_limits.so

# modprobe ip_conntrack

kemudian tambahkan ip_contrack di /etc/modules

# nano /etc/modules

Tambahkan kalimat berikut :

ip_conntrack

DNS Unbound High Performance

apt-get install unbound
cd /etc/unbound
wget ftp://FTP.INTERNIC.NET/domain/named.cache
unbound-control-setup
chown unbound:root unbound_*
chmod 440 unbound_*

sesuaikan config /etc/unbound/unbound.conf, dan servis dns lainnya (bind/dnsmasq dll) harus di stop agar tidak bentrok)

# nano

server:
verbosity: 1
statistics-interval: 120
statistics-cumulative: yes
num-threads: 1
interface: 0.0.0.0

outgoing-range: 512
num-queries-per-thread: 1024

msg-cache-size: 16m
rrset-cache-size: 32m

msg-cache-slabs: 4
rrset-cache-slabs: 4

cache-max-ttl: 86400
infra-host-ttl: 60
infra-lame-ttl: 120

infra-cache-numhosts: 10000
infra-cache-lame-size: 10k

do-ip4: yes
do-ip6: no
do-udp: yes
do-tcp: yes
do-daemonize: yes

#access-control: 0.0.0.0/0 allow
access-control: 192.168.0.0/16 allow
access-control: 172.16.0.0/12 allow
access-control: 10.0.0.0/8 allow
access-control: 127.0.0.0/8 allow
access-control: 0.0.0.0/0 refuse

chroot: “/etc/unbound”
username: “unbound”
directory: “/etc/unbound”
#logfile: “/etc/unbound/unbound.log”
#use-syslog: yes
logfile: “”
use-syslog: no
pidfile: “/etc/unbound/unbound.pid”
root-hints: “/etc/unbound/named.cache”

identity: “DNS”
version: “1.4″
hide-identity: yes
hide-version: yes
harden-glue: yes
do-not-query-address: 127.0.0.1/8
do-not-query-localhost: yes
module-config: “iterator”

#zone localhost
local-zone: “localhost.” static
local-data: “localhost. 10800 IN NS localhost.”
local-data: “localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800″
local-data: “localhost. 10800 IN A 127.0.0.1″

local-zone: “127.in-addr.arpa.” static
local-data: “127.in-addr.arpa. 10800 IN NS localhost.”
local-data: “127.in-addr.arpa. 10800 IN SOA localhost. nobody.invalid. 2 3600 1200 604800 10800″
local-data: “1.0.0.127.in-addr.arpa. 10800 IN PTR localhost.”

#zone bzoet.net
local-zone: “bzoet.net.” static
local-data: “bzoet.net. 86400 IN NS ns1. bzoet.net.”
local-data: “bzoet.net. 86400 IN SOA bzoet.net. hostmaster.bzoet.net. 3 3600 1200 604800 86400″
local-data: “bzoet.net. 86400 IN A 192.168.2.2″
local-data: “www.bzoet.net. 86400 IN A 192.168.2.2″
local-data: “ns1.bzoet.net. 86400 IN A 192.168.2.2″

local-data: “mail.bzoet.net. 86400 IN A 192.168.2.2″
local-data: “bzoet.net. 86400 IN MX 10 mail.bzoet.net.”
local-data: “bzoet.net. 86400 IN TXT v=spf1 a mx ~all”

local-zone: “2.168.192.in-addr.arpa.” static
local-data: “2.168.192.in-addr.arpa. 10800 IN NS bzoet.net.”
local-data: “2.168.192.in-addr.arpa. 10800 IN SOA bzoet.net. hostmaster.bzoet.net. 4 3600 1200 604800 864000″
local-data: “2.2.168.192.in-addr.arpa. 10800 IN PTR bzoet.net.”

forward-zone:
name: “.”
forward-addr: 192.168.2.1
forward-addr: 116.254.99.254
forward-addr: 202.134.0.155
forward-addr: 203.130.196.5
forward-addr: 8.8.8.8
forward-addr: 8.8.4.4
forward-addr: 208.67.222.222
forward-addr: 208.67.220.220

remote-control:
control-enable: yes
control-interface: 127.0.0.1
control-port: 953
server-key-file: “/etc/unbound/unbound_server.key”
server-cert-file: “/etc/unbound/unbound_server.pem”
control-key-file: “/etc/unbound/unbound_control.key”
control-cert-file: “/etc/unbound/unbound_control.pem”

lalu save di /etc/unbound/unbound.conf

forward-zone: sesuaikan dengan DNS ISP anda

cek configure unbound :

# unbound-checkconf /etc/unbound/unbound.conf

edit file di /etc/resolv.conf :

# nano /etc/resolv.conf

nameserver 127.0.0.1

edit file /etc/network/interfaces

# nano /etc/network/interfaces

iface eth0 inet static
address 192.168.2.2
netmask 255.255.255.0
network 122.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 127.0.0.1

untuk cek apakah d jalan :

# /etc/init.d/unbound restart
# nslookup 192.168.2.2
Server: 127.0.0.1
Address: 127.0.0.1#53

2.2.168.192.in-addr.arpa name = bzoet.net

# nslookup bzoet.net
Server: 127.0.0.1
Address: 127.0.0.1#53

Name: B.net
Address: 192.168.2.2

Untuk monitor :

# unbound-control stats

# sudo unbound-control stats | tail -16

# sudo apt-get update
# sudo apt-get install squid

# nano /etc/default/squid

SQUID_MAXFD=8192

# sudo apt-get install squid squidclient squid-cgi
# sudo apt-get install gcc

# grep -E “#define\W+__FD_SETSIZE” /usr/include/*.h /usr/include/*/*.h

# nano /usr/include/linux/posix_types.h

#define __FD_SETSIZE 65536

# nano /usr/include/bits/typesizes.h

#define __FD_SETSIZE 65536

# nano /etc/pam.d/login

Session required /lib/security/pam_limits.so

# sudo apt-get install build-essential
# sudo apt-get install sharutils
# sudo apt-get install ccze
# sudo apt-get install libzip-dev
# sudo apt-get install automake1.9

3.Download Lusca

download lusca r14809 lewat terminal ubuntu dengan perintah :
# wget http://untuk-kita-semua.googlecode.com/files/LUSCA_HEAD-r14809.tar.gz

download lusca FMI lewat terminal ubuntu dengan perintah :
# wget http://untuk-kita-semua.googlecode.com/files/LUSCA_FMI.tar.gz

lalu ekstrak :masuk ke foldernya :
jika memakai lusca r14809 :

# tar xzvf LUSCA_HEAD-r14809.tar.gz

jika memakai lusca FMI :

# tar tar xzvf LUSCA_FMI.tar.gz

jika menggunakan lusca r14809 :
copy file imr.diff ke /home/proxyku dengan menggunakan winscp..
winscp bisa didownload di : 4shared.com /file/KlAfa3dQ/winscp428.html

kemudian copy dengan menggunakan putty…
putty bisa didownload di : 4shared.com /file/16tJyvlq/putty.html

# sudo cp /home/proxyku/imr.diff /home/proxyku/LUSCA_HEAD-r14809

masuk ke foldernya :
jika menggunakan lusca r14809 :

# cd LUSCA_HEAD-r14809/

@ patch dulo revalidate dgn cara : patch -p0 <>

jika menggunakan lusca FMI :

# cd LUSCA_FMI/

jika menggunakan lusca FMI di unbuntu 64 sebelum compile lakukan perintah ini didalam folder lusca FMI :

# make distclean

ok..!! sekarang dimulai tahap compile nya :

cat /proc/cpuinfo : untuk mengetahui info cpu proxy nya dan sesuaikan dengan processor yang anda pakai

Link untuk mengetahui CHOST dan CFLAGS ;
# untuk AMD http://en.gentoo-wiki.com/wiki/Safe_Cflags/AMD
# untuk INTEL http://en.gentoo-wiki.com/wiki/Safe_Cflags/Intel
sebagai contoh saya menggunakan amd x2 7750 BE :

CHOST=”x86_64-pc-linux-gnu” \
CFLAGS=”-march=amdfam10 -msse3 -O2 -pipe” \
./configure –prefix=/usr –exec_prefix=/usr –bindir=/usr/sbin –sbindir=/usr/sbin –libexecdir=/usr/lib/squid –sysconfdir=/etc/squid \
–localstatedir=/var/spool/squid –datadir=/usr/share/squid –enable-async-io=24 –with-aufs-threads=24 –with-pthreads –enable-storeio=aufs \
–enable-linux-netfilter –enable-arp-acl –enable-epoll –enable-removal-policies=heap –with-aio –with-dl –enable-snmp \
–enable-delay-pools –enable-htcp –enable-cache-digests –disable-unlinkd –enable-large-cache-files –with-large-files \
–enable-err-languages=English –enable-default-err-language=English –with-maxfd=65536

selanjutnya, ketik perintah berikut di terminal ubuntu :

# make
# sudo make install

Edit squid.conf

agar perintah sudo /etc/init.d/squid stop jalan di ubuntu 10.10
#copy file squid yg di download tadi ke /etc/init.d/

# sudo cp /home/proxyku/squid /etc/init.d/

jgn lupa di :
#sudo chmod +x /etc/init.d/squid

# stop dulu squidnya :
sudo /etc/init.d/squid stop

#copy file squid.conf, dan storeur.pl yg di download tadi kedalam folder /etc/squid —-> edit sesuai network juragan

sudo cp /home/proxyku/squid.conf /etc/squid
sudo cp /home/proxyku/storeurl.pl /etc/squid

4. Langkah selanjutnya

# Memberikan permission pada folder cache

chown proxy:proxy /cache
chmod 777 /cache
chown proxy:proxy /etc/squid/storeurl.pl
chmod 777 /etc/squid/storeurl.pl

# Membuat folder-folder swap/cache di dalam folder cache yang telah ditentukan dg perintah :

squid -f /etc/squid/squid.conf -z

# Restart squid
sudo /etc/init.d/squid restart

# nano /etc/sysctl.conf

fs.file-max=65536
vm.drop_caches = 3
vm.swappiness = 3
net.netfilter.nf_conntrack_acct= 1
net.ipv4.netfilter.ip_conntrack_max = 16777216

net.ipv4.tcp_keepalive_time = 60
net.ipv4.tcp_keepalive_intvl = 10
net.ipv4.tcp_keepalive_probes = 6
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_max_tw_buckets = 1440000
net.ipv4.ip_local_port_range = 16384 65535
net.core.rmem_max=16777216
net.core.wmem_max=16777216
net.ipv4.tcp_rmem=4096 87380 16777216
net.ipv4.tcp_wmem=4096 65536 16777216
net.ipv4.tcp_fin_timeout = 3
net.core.netdev_max_backlog = 30000
net.ipv4.tcp_no_metrics_save=1
net.core.somaxconn = 262144
net.ipv4.tcp_syncookies = 0
net.ipv4.tcp_max_orphans = 262144
net.ipv4.tcp_max_syn_backlog = 262144
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1

net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
kernel.shmall = 268435456
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1

setelah di save, baru di sysctl -p

catatan : utk ram 512Mb kurangi saja parameter *mem di kolom ke dua dan tiga menjadi setengahnya, kolom ke satu biarkan saja

Reboot CPU nya…

tambahan :

Menghitung memory yang sedang digunakan oleh aplikasi di Linux :

# wget http://www.pixelbeat.org/scripts/ps_mem.py

# chmod +x ps_mem.py

# ./ps_mem.py

Install Squidmon :

# wget http://squidmon.googlecode.com/svn/trunk/squidmon.py
# chmod +x squidmon.py

untuk monitor squid :

# cat /var/log/squid/access.log | ./squidmon.py

# cat /var/log/squid/access.log | python squidmon.py

MEMBUAT SQUIDSTATS

1. apt-get install librrds-perl libsnmp-session-perl snmpd rrdtool snmp apache2 -y
2. perl -MCPAN -e ‘install Config::IniFiles’
3. wget http://jaringanwarnet.com/downloads/squidstats-r54.tar
4. tar -xvf squidstats-r54.tar
5. cd squidstats-r54
5. cp mib.txt /etc/squid/
6. cp snmpd.conf /etc/snmp/
8. untuk squid.conf tambahkan berikut ini :

snmp_port 3401
acl snmppublic snmp_community public
snmp_access allow snmppublic all

9. make && make install
10. snmpwalk -v 1 -c public localhost
11. squidstats.pl createdb
12. squidstats.pl gather
13. crontab -e (kemudian copy rule dibawah ini)
*/5 * * * * /usr/local/bin/squidstats.pl gather >/dev/null
14. cp squidstats.conf /etc/apache2/conf.d
15. reboot
16. cek hasilnya ke http://isi dg ipproxy/squidstats/graph-summary.cgi

Agar bias di akses dari luar buat spt ini :
/ip firewall nat
add action=dst-nat chain=dstnat comment=redir-squidtasq disabled=no \
dst-address=xxx.xxx.xxx.xxx dst-port=8080 protocol=tcp to-addresses=192.168.2.2 to-ports=80

Untuk memonitor SQUID :

sudo /etc/init.d/squid stop

sudo /etc/init.d/squid restart

/etc/init.d/unbound restart

unbound-control stats

sudo unbound-control stats | tail -16

squidclient mgr:info

squidclient mgr:client_list

tail -f /var/log/squid/access.log

tail -f /var/log/squid/cache.log

tail -n 80 /var/log/squid/cache.log

squidclient mgr:storedir

cat /var/log/squid/access.log | ./squidmon.py

cat /var/log/squid/access.log | python squidmon.py

http://192.168.2.2/squidstats/graph-summary.cgi

./ps_mem.py

credit to teukurizal
http://forummikrotik.com

6 komentar:

  1. tanya gan??

    #nslookup 192.168.2.2
    Server: 127.0.0.1
    Address: 127.0.0.1#53

    ** server can't find 2.2.168.192.in-addr.arpa.: NXDOMAIN

    please!! kasih pencerahannya gan??

    nb. apa mungkin waktu install ubuntu domain: aku kosongin kali ya??
    atau yang lainnya gan??

    terima kasih gan??

    BalasHapus
  2. pusing baca tutorialnya :)

    BalasHapus
  3. mantap.........
    klu bisa kasih pic mas..

    BalasHapus
  4. download yg :
    untuk lusca r14809 : http://untuk-kita-semua.googlecode.com/files/SQUID%202%20LUSCA.zip

    Untuk lusca FMI : http://untuk-kita-semua.googlecode.com/files/SQUID-CONF.zip

    FORBIDEN...

    Gimana ni gan sharenya yg ikhlas donk...............

    BalasHapus
    Balasan
    1. Ini Gan ...

      untuk Lusca r14809 http://lusca-cache.googlecode.com/files/LUSCA_HEAD-r14809.tar.gz

      Lusca FMI http://proxy-ku.googlecode.com/files/LUSCA_FMI.tar.gz

      Semoga bisa membantu...maaf telat .... :)

      Bismillah ikhlassss....

      Hapus
  5. Lusca Head Proxy...........
    Patch Lusca Head Proxy Loop
    Patch Lusca Head Proxy Lusca varry
    Update Sources List Local Server Ubuntu'

    Silahkan download :


    Lusca Head Proxy r14733 :
    http://www.mediafire.com/download.php?lrkmln3t6no4a2o
    Patch Lusca Head Proxy Loop :
    http://www.mediafire.com/download.php?4x6n3r3dn023n8t
    Patch Lusca Head Proxy Lusca varry :
    http://www.mediafire.com/download.php?j1ayt26buydibsz
    Update Sources List Local Server Ubuntu :
    http://www.mediafire.com/download.php?nbdqge013rf5del

    (o) :d

    BalasHapus

Silahkan Berikan suaramu dalam bentu apapun untuk blogku Okha.

 
Top